How to Save Money and Time Fixing Plumbing Problems

| December 30, 2020
plumbing problems

plumbing problems

Every homeowner must have a basic knowledge of plumbing. It’s only a matter of time before your pipes and fixtures break down and need expensive repairs or replacements.

There are many ways to reduce the time and money needed to fix major problems.

Detect Leaks

Many plumbing problems are caused by leaks that can be fixed and prevented.

Some leaks get bigger and cause extensive water damage throughout your home.

The best repair is to detect the early signs of a leak before it causes any damage.

There is professional equipment with sensors that detect water and send off alarms.

Schedule Annual Maintenance

Maintaining your plumbing system is the only way to prevent plumbing problems that cause expensive repairs.

Maintenance work only needs to be done once a year and is more affordable than making repairs and replacements.

During a typical checkup, the plumber usually carries out a camera inspection that involves sending a camera through the pipes to look for blockades.

Another maintenance task is to check the speed and efficiency of different plumbing fixtures like the sink, toilet or shower drain.

Block the Drains

Prevent hair and other debris from entering your sink and shower drains. You’ll notice a clog when a flood forms every time you run the water.

Use plugs and strainers whenever you shave or wash hair that breaks off easily.




Avoid pouring grease, food, and solid materials down the drains to prevent clogs that need to be removed.

Consider getting a professional drain cleaning to clear out old clogs in your bathroom.

Wash the Tanks

Wash and clear out your water heaters every few years to prevent mineral buildups that become disastrous.

Sediment that collects uncontrollably will reduce water temperature and block the valves that release water.

At its worst, a buildup causes your tank to fail altogether.

Know the Shut-Off Valve

If you’ve had burst pipes in the past, know where your shut-off valve is located to prevent a flood.

This problem occurs often when pipes freeze during the winter. Some pipes burst due to old age or in very bad condition.

Know where the shut-off valve is located, and learn how to turn it on and off to prevent flooding.

Reduce the costs and hassles of hiring a plumber by learning basic plumbing yourself.

Long-term maintenance is recommended to avoid plumbing problems.

Keep your plumbing running optimally for as long as possible, and save your money for more desirable projects like bathroom or kitchen remodeling.

Tags: ,

Category: Home Repair

About the Author ()

Comments are closed.