Clean Your Own Carpet And Save Money In The Process

| February 2, 2014

carpetNo homeowner ever wants to replace their rug. No matter how dirty it may get, rugs cost a lot of money, so it is best to understand your options before making any serious decisions. In order to save a little money, you should first research the ways in which you may be able to clean your rug without the additional costs of a rug cleaning crew.

Steam cleaning is one of the most effective ways to restore a dirty rug to its original state. A steam cleaner uses hot water that is converted into steam to such a degree that only a small percentage of standing water remains. This prevents the rug from becoming overly saturated and helps it to dry quickly when the job is done, eliminating the risk of mold. However, there is still enough hot moisture to sanitize the rug or carpet, removing the dirt and grime that hides deep within the fibers.

Choosing A Steam Cleaner

The first major step in steam carpet cleaning is choosing the cleaner that works best for you. Steam cleaners can be rented, but purchasing one may prove to be a worthy investment. As mentioned earlier, the cleaner must emit the right amount of moisture to sanitize and lift the dirt, while being careful not to soak the carpet and make it difficult to dry. Steam cleaners must be powerful, yet they must also be efficient. It is best to use the cleaner first hand before purchasing. Talk to other home owners to see what kind of experiences they have had.

When To Use Steam Cleaners

Cleaning a carpet is quite tedious and requires care and attention. It is important to pick the right day to clean. For instance, it is wise to clean the carpet on a mild day. Humid weather will make it difficult for the rug or carpet to dry once the process is complete. This kind of humidity can actually cause the carpet to separate from the flooring. This added moisture can also lead to the growth of mold, which is one of the worst problems that a homeowner can face.

Pay Attention To The Details

A steam cleaner requires a cleaning solution. This solutions helps to disinfect the fibers of the rug and prevent dirt from being re-absorbed in the future. However, it is important to use the right amount of cleaning solution. The pH level of the mixture should be below ten. This helps to maintain a reasonable balance to protect the carpet. Using too much solution can cause serious damage to the carpet and even cause the color dyes to fade.

The Carpet Cleaning Process

There are many minor details that can make the carpet cleaning process much easier. For instance, be sure to remove all furniture and other objects from the carpeted area. Do not attempt to clean around furniture, because this will inevitably cause dirt to be left behind. This dirt will spread and reduce the time that the carpet remains sanitized.

Also, be sure to start at the farthest corner and work your way towards the door. This helps you to avoid stepping in spots that have already been cleaned. Unlike when vacuuming, go over every spot multiple times to ensure that the steam cleaner lifts all of the cleaning solution out of the carpet fibers. The last major detail is to use air conditioning or fans to help dry the carpet as quickly as possible.

You should avoid replacing your carpet as long as possible. Steam cleaning is not necessarily an easy task, but you will save a little money in the long run. Try a steam cleaner and take control of your carpet.

 

Tags: ,

Category: Home Renovation, Saving Money

About the Author ()

Comments are closed.